Trident Help

Classic Graphing 84 manual · Chapter 23 of 25

Drawing on the graph

Draw lines, tangents, circles, points and text on the graph screen with the DRAW menu, shade between curves, and shade distribution areas.

23.1The DRAW menu#

Press 2ndDRAWprgm for DRAW. Choose a command, type its numbers (they use the coordinates of the current window), close the bracket and press enter. The calculator shows the graph with your drawing. Drawings stay until ClrDraw. The same commands can be used in programs.

The DRAW tab. The display shows: [DRAW] POINTS / 1:ClrDraw / 2:Line( / 3:Horizontal / 4:Vertical / 5:Tangent( / 6:DrawF / 7↓Shade(.
The DRAW tab.
The POINTS tab. The display shows: DRAW [POINTS] / 1:Pt-On( / 2:Pt-Off( / 3:Pt-Change(.
The POINTS tab.
ItemCommandDraws
1ClrDrawErases all drawings.
2Line(Line(x1,y1,x2,y2) a segment between two points.
3HorizontalHorizontal y: a horizontal line at y.
4VerticalVertical x: a vertical line at x.
5Tangent(Tangent(expression,x) the tangent line of an expression (or Y1) at x.
6DrawFDrawF expression draws the graph of an expression in X without using a Y= slot.
7Shade(Shade(lower,upper[,Xleft,Xright,pattern,resolution]) shades where lower < upper. Pattern 1 vertical, 2 horizontal, 3 and 4 diagonal; resolution 1 (solid) to 8 (every 8th pixel).
8DrawInvDrawInv expression draws the inverse: the points (f(X), X).
9Circle(Circle(x,y,radius) a circle.
0Text(Text(row,column,"text") text at a pixel position.
POINTS 1, 2, 3Pt-On(, Pt-Off(, Pt-Change(Pt-On(x,y) turns a point on, Pt-Off( removes it, Pt-Change( switches it to the other state.

23.2Draw a line segment#

Example 23.1

A diagonal line

  1. Press zoom, 6 for the standard window, go home with 2nd mode, then 2nd prgm, 2 and type 0,0,5,5.

    zoom62ndQUITmode2ndDRAWprgm20,0,5,5)enter
    After step 1: Press zoom, 6 for the standard window, go home with 2nd mode, then 2nd prgm, 2 and type 0,0,5,5.
  2. Go home to see that the command ran.

    2ndQUITmode
Result of the example "A diagonal line" The display shows: Line(0,0,5,5) / Done.
You should seeLine(0,0,5,5) Done

Use graph to return to the picture, and ClrDraw (DRAW item 1) to erase it.

23.3Draw a circle#

Circle(x,y,r) draws a circle with center (x, y). Use ZSquare (zoom, 5) first so that it looks round.

Example 23.2

A circle of radius 3

  1. Set the window with ZSquare, go home, then 2nd prgm, 9 and type 0,0,3.

    zoom52ndQUITmode2ndDRAWprgm90,0,3)enter2ndQUITmode
Result of the example "A circle of radius 3" The display shows: Circle(0,0,3) / Done.
You should seeCircle(0,0,3) Done
The circle on the graph screen.
The circle on the graph screen.

23.4Horizontal and vertical lines and points#

Example 23.3

A vertical line at x = 2

  1. Press 2nd prgm, 4 (Vertical) and type 2.

    zoom62ndQUITmode2ndDRAWprgm42enter2ndQUITmode
Result of the example "A vertical line at x = 2" The display shows: Vertical 2 / Done.
You should seeVertical 2 Done
Example 23.4

Plot a point

  1. Press 2nd prgm, right, 1 (Pt-On() and type 3,3.

    zoom62ndQUITmode2ndDRAWprgm▶13,3)enter2ndQUITmode
Result of the example "Plot a point" The display shows: Pt-On(3,3) / Done.
You should seePt-On(3,3) Done
Example 23.5

Draw a curve with DrawF

  1. Press 2nd prgm, 6 (DrawF) and type X²−4. The curve is drawn but Y= stays empty.

    zoom62ndQUITmode2ndDRAWprgm6X,T,θ,nx²−4enter2ndQUITmode
Result of the example "Draw a curve with DrawF" The display shows: DrawF X²−4 / Done.
You should seeDrawF X²−4 Done

23.5Tangent lines, inverses and shading#

Tangent( draws the line that touches a curve at one x value. DrawInv draws the mirror image of a curve in the line y = x. Shade( fills the region between a lower and an upper curve, only where the lower one is below the upper one.

Example 23.6

The tangent of x² at x = 1

  1. Press zoom, 6, go home, then 2nd prgm, 5 (Tangent() and type X²,1. The line y = 2x − 1 is drawn.

    zoom62ndQUITmode2ndDRAWprgm5X,T,θ,nx²,1)enter
    After step 1: Press zoom, 6, go home, then 2nd prgm, 5 (Tangent() and type X²,1. The line y = 2x − 1 is drawn.
  2. Go home.

    2ndQUITmode
Result of the example "The tangent of x² at x = 1" The display shows: Tangent(X²,1) / Done.
You should seeTangent(X²,1) Done
Example 23.7

Shade between y = x² − 4 and y = 2

  1. Press zoom, 6, go home, then 2nd prgm, 7 (Shade() and type X²−4,2.

    zoom62ndQUITmode2ndDRAWprgm7X,T,θ,nx²−4,2)enter
    After step 1: Press zoom, 6, go home, then 2nd prgm, 7 (Shade() and type X²−4,2.
  2. Go home.

    2ndQUITmode
Result of the example "Shade between y = x² − 4 and y = 2" The display shows: Shade(X²−4,2) / Done.
You should seeShade(X²−4,2) Done

TI-84 Plus CE is a trademark of Texas Instruments Incorporated. Trident Calculator is an independent product by South View Studios and is not affiliated with, sponsored by or endorsed by Texas Instruments. The name is used only to describe the kind of calculator this model resembles; Trident's names, keys, display, fonts and software are its own clean-room design.