Trident Help

Classic Graphing 84 manual · Chapter 15 of 25

Statistics plots

Draw scatter plots, line plots, histograms and box plots of your lists, and fit the window to the data with ZoomStat.

15.1Set up a statistics plot#

Press 2ndSTAT PLOTy= (STAT PLOT). Choose Plot1, Plot2 or Plot3 to edit it; 4 PlotsOff and 5 PlotsOn switch all three. On the setup screen choose On, the plot Type, the lists to use, the mark and the color. Turn the plot on, then press graph or use ZoomStat so the data fits the window.

The STAT PLOTS menu. The display shows: STAT PLOTS / 1:Plot1…Off Scat L1 L2 / 2:Plot2…Off Scat L1 L2 / 3:Plot3…Off Scat L1 L2 / 4:PlotsOff / 5:PlotsOn.
The STAT PLOTS menu.
Setting up Plot1. The display shows: [Plot1] Plot2 Plot3 / On [Off] / Type:[Sct] xyL Hst MBx Box / Xlist:L1 / Ylist:L2 / Mark:[□] + · / Color:◀BLUE▶.
Setting up Plot1.
TypeDraws
Sct (scatter)One mark per (x, y) pair from Xlist and Ylist.
xyL (xy line)The same points joined by lines.
Hst (histogram)Bars of the data in Xlist; bar width is Xscl in WINDOW. Needs only an Xlist (and optional Freq).
MBx (modified box)A box plot that marks outliers as separate points.
BoxA box plot from minimum to maximum.

15.2Draw a scatter plot#

Example 15.1

Scatter plot of three points

  1. Store {1,2,3} in L1 and {2,4,5} in L2.

    2nd{(1,2,32nd})sto→2ndL11enter2nd{(2,4,52nd})sto→2ndL22enter
  2. Open STAT PLOT, choose 1, move left to On and press enter.

    2ndSTAT PLOTy=1◀enter
    After step 2: Open STAT PLOT, choose 1, move left to On and press enter. The display shows: [Plot1] Plot2 Plot3 / [On] Off / Type:[Sct] xyL Hst MBx Box / Xlist:L1 / Ylist:L2 / Mark:[□] + · / Color:◀BLUE▶.
  3. Press zoom and 9 (ZoomStat), then open WINDOW to see the fitted window.

    zoom9window
Result of the example "Scatter plot of three points" The display shows: WINDOW / Xmin=.8 / Xmax=3.2 / Xscl=1 / Ymin=1.7 / Ymax=5.3 / Yscl=1 / Xres=1.
You should seeXmin=.8
The scatter plot after ZoomStat.
The scatter plot after ZoomStat.

15.3Draw a histogram#

Choose Hst as the type. The width of each bar is Xscl and the first bar starts at Xmin, so set both in WINDOW (ZoomStat chooses them for you).

Example 15.2

Choose the histogram type

  1. Open Plot1, switch it on, move down to Type and choose Hst.

    2ndSTAT PLOTy=1◀enter▼▶▶enter
Result of the example "Choose the histogram type" The display shows: [Plot1] Plot2 Plot3 / [On] Off / Type:Sct xyL [Hst] MBx Box / Xlist:L1 / Freq:1 / Color:◀BLUE▶.
You should seeHst]
A histogram of {1,2,2,3,3,3} after ZoomStat.
A histogram of {1,2,2,3,3,3} after ZoomStat.

15.4Draw a box plot#

A box plot shows the minimum, first quartile Q1, median, third quartile Q3 and maximum. Use MBx to see outliers (values more than 1.5×IQR1.5\times IQR beyond the box) as separate dots.

A modified box plot of {1,2,2,3,3,9}; the 9 is drawn as an outlier.
A modified box plot of {1,2,2,3,3,9}; the 9 is drawn as an outlier.

15.5Switch all plots on or off#

Example 15.3

PlotsOn

  1. Press 2nd yeq then 5 (PlotsOn), then open the menu again.

    2ndSTAT PLOTy=52ndSTAT PLOTy=
Result of the example "PlotsOn" The display shows: STAT PLOTS / 1:Plot1…On  Scat L1 L2 / 2:Plot2…On  Scat L1 L2 / 3:Plot3…On  Scat L1 L2 / 4:PlotsOff / 5:PlotsOn.
You should see3:Plot3…On

Typed on the home screen or used in a program, PlotsOn and PlotsOff take plot numbers: PlotsOff 2,3 switches off only Plot2 and Plot3. Plot1(, Plot2( and Plot3( (in the CATALOG) set up a plot in one line and switch it on: Plot1(Scatter,L1,L2) or Plot1(xyLine,L1,L2,+) for points, Plot2(Histogram,L1) and Plot3(Boxplot,L1) or ModBoxplot for one list, with an optional frequency list. The mark is □, + or ·.

Example 15.4

Set up Plot1 with a command

  1. Store data in L1 and L2.

    2nd{(1,2,32nd})sto→2ndL11enter2nd{(2,4,52nd})sto→2ndL22enter
  2. In the CATALOG press alpha 8 (P), down four times to Plot1( and enter. Then paste Scatter (alpha ln in the CATALOG), type ,L1,L2) and press enter.

    2ndCATALOG0alphaP8▼▼▼▼enter2ndCATALOG0alphaSlnenter,2ndL11,2ndL22)enter
  3. Open STAT PLOT to see the result.

    2ndSTAT PLOTy=
Result of the example "Set up Plot1 with a command" The display shows: STAT PLOTS / 1:Plot1…On  Scat L1 L2 / 2:Plot2…Off Scat L1 L2 / 3:Plot3…Off Scat L1 L2 / 4:PlotsOff / 5:PlotsOn.
You should see1:Plot1…On Scat L1 L2

15.6Trace a statistics plot#

With a plot on, press trace. The cursor starts on the first data point and the top line names the plot and its lists (P1:L1,L2). ▶ and ◀ step from point to point in list order. On a histogram each step is one bar and shows its min, max and count n; on a box plot the steps are the minimum, Q1, the median, Q3 and the maximum (and outliers on a modified box plot). ▼ and ▲ move between the plots and the Y= functions.

Tracing a scatter plot: the second data point. The display shows: P1:L1,L2 / X=2          Y=4.
Tracing a scatter plot: the second data point.
Example 15.5

Read the data points

  1. Store {1,2,3} in L1 and {2,4,5} in L2, switch Plot1 on and use ZoomStat.

    2nd{(1,2,32nd})sto→2ndL11enter2nd{(2,4,52nd})sto→2ndL22enter2ndSTAT PLOTy=1◀enterzoom9
  2. Press trace, then right once.

    trace▶
Result of the example "Read the data points" The display shows: P1:L1,L2 / X=2          Y=4.
You should seeP1:L1,L2 X=2 Y=4
Example 15.6

The five-number summary of a box plot

  1. Store {1,2,2,3,3,9} in L1, set Plot1 to the Box type and use ZoomStat.

    2nd{(1,2,2,3,3,92nd})sto→2ndL11enter2ndSTAT PLOTy=1◀enter▼▶▶▶▶enterzoom9
  2. Press trace and right twice to reach the median.

    trace▶▶
Result of the example "The five-number summary of a box plot" The display shows: P1:L1 / Med=2.5.
You should seeP1:L1 Med=2.5

TI-84 Plus CE is a trademark of Texas Instruments Incorporated. Trident Calculator is an independent product by South View Studios and is not affiliated with, sponsored by or endorsed by Texas Instruments. The name is used only to describe the kind of calculator this model resembles; Trident's names, keys, display, fonts and software are its own clean-room design.